Industry Briefing
A single destination for timely, editor-curated robotics news from around the world.
Zone Separation Innovations Could Enhance Cold Chain Efficiency in the UK
The UK, holding the largest cold storage market in Europe, faces significant challenges as cold-chain energy costs surged by 46% in 2023. The Cold Chain Federation highlights that the temperature-controlled sector contributes £14 billion to the economy, making energy management a critical operational factor for logistics operators. A major energy drain in distribution centers arises from the movement of goods between temperature zones, with air infiltration accounting for over half of the refrigeration load in high-traffic facilities. Implementing physical zone separation, such as temperature-separating curtain walls and PVC strip curtains, can significantly reduce energy loss by minimizing uncontrolled air exchange. As the cold chain sector moves towards energy efficiency, particularly in light of the UK's 2050 Net Zero target, the adaptability of curtain systems offers a practical solution. These systems allow for flexible reconfiguration of temperature zones without extensive construction, aligning with the industry's evolving needs while promoting energy savings without major facility overhauls. No further timeline was disclosed at the time of publication.
Cold Chain Logistics Storage & Racking Transport and Distribution Warehouse Property Warehousing cold chain
Gremsy USA Unveils Blue UAS-Cleared Payloads Amid Drone Supply Chain Changes
Gremsy USA has launched three drone payloads compliant with NDAA and Blue UAS standards for the U.S. market. This introduction responds to increasing federal pressure on drone manufacturers to establish domestic and reliable supply chains. The new products include the VIO F1, ORUS L NDAA, and LYNX NDAA, with pre-orders now being accepted. This development is significant as it aligns with the broader shift in U.S. drone policy, particularly following the Federal Communications Commission's December 2025 decision to include foreign-produced UAS and critical components on its Covered List. The White House has also emphasized the importance of domestic production, citing national security concerns regarding reliance on foreign drone components. Gremsy USA's strategy aims to meet these stringent sourcing requirements while leveraging its established international expertise. Looking ahead, Gremsy USA's U.S. operations focus on engineering and manufacturing compliant payloads domestically, integrating its gimbal technology with NDAA-compliant thermal imaging from Teledyne FLIR OEM. The VIO F1 is designed for industrial inspections and situational awareness, while the ORUS L NDAA targets long-range operations for surveillance and reconnaissance. No further timeline was disclosed at the time of publication.
defense Drone News Drone News Feeds NDAA Compliant News Products
White House Hosts Drone Industry Event to Discuss Supply Chain Dominance
The White House convened drone manufacturers, component suppliers, and government officials for its inaugural Drone Dominance industry event, highlighting the administration's commitment to enhancing U.S. drone production. Nearly 100 representatives attended, with about 40 companies participating, including those that supply critical components like batteries and sensors. This initiative underscores the necessity of developing a comprehensive domestic drone ecosystem that encompasses not only aircraft assembly but also the supply of essential technologies and materials. A recent Executive Order mandates that contractors trace their supply chains from raw materials to end products, revealing the complexities involved in establishing a self-sufficient drone industry. Looking ahead, the administration has identified significant dependencies on foreign sources for various drone components, indicating a pressing need for domestic capacity expansion. The overlap between military and commercial drone production suggests that efforts to strengthen the supply chain will benefit both sectors, although no further timeline was disclosed at the time of publication.
Drone News Drone News Feeds Dual Use News Policy US Government
SES.AI Highlights Challenges in Building America's Drone Supply Chain Ecosystem
SES.AI, based in Massachusetts, is addressing the complexities of establishing a secure U.S. drone supply chain. The company focuses on developing advanced battery technologies crucial for drone performance, while also leveraging its 'Molecular Universe' database to explore new materials for battery innovation. The significance of this initiative lies in the U.S. drone policy's push for secure supply chains and reduced reliance on foreign components, particularly from China. As U.S. manufacturers shift towards domestic production, they face the challenge of not just assembling drones but also rebuilding the entire ecosystem of batteries, motors, and electronics that support them. Looking ahead, the urgency for alternatives in the U.S. drone industry is growing. SES.AI's operations in Chungju, South Korea, highlight the importance of a skilled workforce and supplier network, which are essential for scaling production. No further timeline was disclosed at the time of publication.
battery technology Blue UAS defense DL Exclusive Drone Manufacturing Drone News
Honeywell Aerospace Adjusts Earnings Forecast Due to Supply Chain Challenges
Honeywell Aerospace has revised its earnings forecast downward, attributing the change to ongoing supply chain issues. CEO James Currier indicated that the company had anticipated improvements in supply chain operations would enhance production rates more rapidly this year. This adjustment is significant as it highlights the persistent challenges faced by manufacturers in the aerospace sector, particularly in managing supply chain disruptions. The inability to resolve these issues as expected may impact Honeywell's overall performance and investor confidence. Looking ahead, stakeholders should monitor Honeywell's strategies for addressing these supply chain hurdles and any potential timelines for recovery. No further timeline was disclosed at the time of publication.
China Implements Stricter Export Controls on Drones, Impacting U.S. Supply Chains
China has introduced new export control measures affecting specific drones and related technologies bound for the United States, as announced by the Ministry of Commerce on August 5, 2026. These measures require stricter case-by-case reviews for exports already listed on China's dual-use export control list, which could complicate supply chains for U.S. manufacturers reliant on Chinese components. The significance of these controls lies in their potential impact on U.S. drone manufacturers, many of whom still depend on Chinese suppliers for essential components like motors, batteries, and sensors. While the announcement does not ban all drone exports, it imposes tighter licensing requirements that could lead to longer lead times and increased compliance burdens, particularly for smaller manufacturers with limited sourcing options. Looking ahead, the new licensing requirements may slow product introductions and extend delivery schedules, affecting manufacturing more than field operations. The evolving regulatory landscape on both sides of the supply chain underscores the growing importance of navigating export controls and national security policies in the global drone market. No further timeline was disclosed at the time of publication.
Drone Manufacturing Drone News Drone News Feeds Drones in the News Dual Use Feature 1
USA Drone Motors Launches to Address Domestic Drone Supply Chain Needs
USA Drone Motors has officially launched to manufacture large electric motors, actuators, and electronic speed controllers for agricultural and heavy-lift drones in southern California. Founder Jon Facer identified a significant market opportunity as U.S. drone manufacturers seek to lessen their reliance on Chinese suppliers due to recent FCC restrictions on foreign-made drones and components. This development is crucial as it comes at a time when U.S. drone manufacturers are scrambling to reshore production amid the inability of companies like DJI to introduce new models in the U.S. market. Facer's insights from an agricultural drone conference highlighted the industry's urgent need for domestic solutions, particularly for components that are currently dominated by a few Chinese suppliers. Looking ahead, USA Drone Motors aims to enhance U.S. assembly and engineering capabilities while gradually localizing its supply chain. Although initial production will not fully utilize U.S. materials due to sourcing challenges for key components, the company is focused on developing initial designs and gathering feedback from drone manufacturers and users to refine its offerings. No further timeline was disclosed at the time of publication.
Agtech Precision agriculture Startups & funding US & Canada drones
FCC Proposes New Rules for Drone Manufacturers on Software and Hardware Disclosure
The Federal Communications Commission (FCC) has initiated a rulemaking process that may require drone manufacturers to disclose comprehensive details about their hardware and software. This proposal, published on August 7, is part of the FCC's Third Further Notice of Proposed Rulemaking and aims to enhance transparency in the commercial drone industry. This rulemaking is significant as it could reshape the regulatory landscape for drone manufacturers, particularly through the proposed Hardware Bill of Materials (HBOM) and Software Bill of Materials (SBOM). Will Dawson from the Agricultural Drone Initiative emphasized that these requirements could be pivotal, as they would mandate certification applicants to provide detailed information about each component's producer and production location, potentially impacting supply chains and security protocols. As the FCC seeks public comment on these proposals, the industry should monitor the developments closely. The implications of the HBOM and SBOM requirements could lead to stricter certification processes and influence how drone manufacturers manage their supply chains. No further timeline was disclosed at the time of publication.
Agriculture Applications Drone News Drone News Feeds Feature 1 News
Unitree R1 Humanoid Price Drops Below 30K Yuan, Forecasts Rise Amid Supply Chain Changes
Unitree has reduced the price of its R1 humanoid robot to below 30,000 yuan, prompting significant shifts in the robotics supply chain. Morgan Stanley has updated its forecast for 2026, predicting sales of 50,000 units, reflecting increased market demand and competition. This price reduction is crucial as it pressures suppliers like Harmonic Drive to adapt to a more competitive landscape. The entry of companies like Leaderdrive and Shuanghuan Drivetrain into overlapping markets indicates a diversification strategy among competitors, which could reshape their operational focus and product offerings. Looking ahead, the industry will likely see continued evolution as companies adjust to the new pricing dynamics and consumer expectations. No further timeline was disclosed at the time of publication.
Industry
Elbit Systems Proposes Watchkeeper X for UK's Project Corvus Long-Range Drone
Elbit Systems's U-TacS is set to propose the Watchkeeper X variant for the UK's Project Corvus, which seeks a long-range reconnaissance drone. This initiative is significant as it aims to enhance the UK's surveillance capabilities in various operational environments. Stakeholders should monitor the development of this proposal and its implications for future defense contracts and drone technology advancements.
News
Sila Secures $300 Million to Enhance U.S. Battery Anode Production for Drones
Sila has successfully raised $300 million in private funding aimed at expanding its silicon-carbon battery anode technology production in the United States. This investment will bolster manufacturing capacity at its Moses Lake, Washington facility, facilitating a Phase 2 expansion and accelerating the production of its Titan Silicon® anode technology. The significance of this funding lies in its potential to strengthen domestic supply chains for advanced battery materials, particularly in light of the current dominance of China in anode material processing and battery cell manufacturing. With battery materials becoming increasingly crucial for technology security, Sila's efforts could mitigate supply chain risks for industries reliant on advanced batteries, including drones, defense systems, and electric vehicles. Looking ahead, Sila's expansion plans include increasing its Moses Lake facility's capacity from an initial 2 GWh to as much as 250 GWh over the next five years, potentially establishing it as the world's largest anode production site. No further timeline was disclosed at the time of publication.
Applications Drone Manufacturing Drone News Drone News Feeds News AI infrastructure
FCC Proposes Ban on Sales of Certain Military-Grade Foreign Drones to Reshape U.S. Market
The Federal Communications Commission (FCC) is advancing its initiative to reform the U.S. drone market by seeking public input on a proposed ban on the import, marketing, or sale of specific categories of foreign-produced military-grade drones listed on its Covered List. This move follows a previous decision to restrict certain foreign uncrewed aircraft systems due to national security concerns. This proposal is significant as it reflects the FCC's evolving strategy, which now includes establishing regulatory pathways for domestic manufacturers that comply with U.S. security standards. The FCC aims to provide greater certainty for companies investing in U.S.-based production while addressing potential national security risks associated with foreign drones. Comments on the proposed restrictions are due 30 days after the notice is published in the Federal Register. The FCC is also extending exemptions for trusted manufacturers until January 1, 2028, and has permanently removed expiration dates for certain approved drones and components, ensuring stability in the supply chain for compliant products.
Applications defense Defense Drone News Drone News Feeds Drone Swarms
DHL Supply Chain and Locus Robotics Achieve One Billion Warehouse Picks Milestone
DHL Supply Chain and Locus Robotics have reached a significant milestone with their warehouse robots completing one billion picks. This achievement occurred at a DHL facility, showcasing the effectiveness of autonomous mobile robots in modern logistics operations. The milestone pick involved a pink beanie, underscoring the scale of automation in global logistics networks. This accomplishment is crucial as it highlights the rapid advancement of warehouse automation, driven by the partnership between DHL and Locus Robotics since 2017. The deployment of thousands of autonomous mobile robots across over 40 DHL-managed facilities has improved productivity in various sectors, including e-commerce and healthcare logistics. The technology has resulted in substantial operational gains, such as a 30-180 percent increase in units picked per hour and an 80 percent reduction in training time for staff. Looking ahead, DHL plans to further expand its collaboration with Locus Robotics, aiming to deploy 5,000 additional autonomous mobile robots. This expansion reflects the growing need for scalable automation solutions in response to complex order patterns in logistics. No further timeline was disclosed at the time of publication.
How a drone maker aims to fix the supply chain
Brett Velicovich, co-founder of Powerus and a U.S. Army veteran, has outlined the company's initiative to establish a comprehensive drone manufacturing process within the United States. This effort aims to enhance domestic production capabilities and reduce reliance on foreign suppliers. By leveraging his military experience and expertise in drone technology, Velicovich is spearheading this project to address growing demands in the drone industry. The initiative is part of a broader movement to bolster American manufacturing and innovation, particularly in the defense and technology sectors. Powerus is actively working on developing the necessary infrastructure and partnerships to facilitate this transition, with plans to implement the manufacturing process in the near future.
SpaceX's Starmind Project: Supplier Strategy and Chip Manufacturing Plans for 2026
SpaceX's Starmind project, aimed at deploying up to 1 million AI satellites, was filed with the FCC on January 30, 2026. The initiative is designed to minimize reliance on external suppliers, with CEO Elon Musk stating that current chip production capabilities only meet 2% of the projected needs. The first satellite, AI1, is set for prototype launches in early 2027, featuring a 70-meter wingspan and a modular payload system that allows for interchangeable chips from various suppliers. The significance of Starmind lies in its ambitious supply chain strategy, which seeks to transition from external hardware suppliers to a fully integrated Musk-owned facility by 2028. The Gigasat manufacturing site in Bastrop, Texas, is expected to be operational by the end of 2027, with plans for high-volume production of the D3 chip, specifically designed for space applications. This approach aims to consolidate chip manufacturing processes under the Terafab joint venture, which has an estimated initial investment of $55 billion. Looking ahead, the next milestone for Starmind is the launch of AI1 prototypes in early 2027, while the full-scale chip production at Terafab is projected to ramp up significantly thereafter. However, analysts express skepticism regarding the feasibility of achieving Musk's ambitious compute goals, which may require substantial investment and time to establish the necessary manufacturing capabilities.
How Cold Chain Operators Are Turning Energy Flexibility Into a Competitive Advantage
Cold storage facilities, known for their high energy consumption, face increasing challenges as the cost of electricity becomes more dependent on consumption timing rather than just the volume used. This shift in energy pricing creates a difficult situation for operators who have traditionally viewed electricity costs as fixed. As refrigeration systems must run continuously to maintain product integrity, the significant energy load required raises concerns about operational expenses and sustainability. The industry is now compelled to adapt to these changing dynamics, prompting a reevaluation of energy management strategies to mitigate costs and enhance efficiency.
Business Logistics automation news cold chain cold chain logistics cold storage
The Next Drone Supply Chain Challenge: Rare Earth Magnets
A new bipartisan bill has been introduced in Congress to bolster the United States' domestic supply chain for rare earth magnets, which are essential components in drone motors. The legislation, spearheaded by Chairman John Moolenaar (R-MI) and Ranking Member Ro Khanna (D-CA), addresses the growing concern over America's reliance on China for these critical materials. The initiative comes amid increasing recognition of the challenges faced by the drone industry, particularly regarding the sourcing of permanent magnets necessary for electric motor functionality. By enhancing domestic production capabilities, the bill aims to ensure a more secure and reliable supply chain for the burgeoning drone sector.
Drone Manufacturing Drone News Drone News Feeds drone parts drone technology Feature 1
Drone Dominance: The Defense Department’s Push to Build a Scalable U.S. Drone Supply Chain
During the keynote roundtable at XPONENTIAL 2026 this morning, leaders from government and industry convened to discuss a pivotal shift in the U.S. drone sector. The focus of the panel, moderated by Michael Robbins of AUVSI, was on advancing from initial innovation and prototype development to establishing robust industrial production and scrutinizing the supply chain. This transition aims to facilitate rapid military acquisition of drone technology, reflecting the Department of Defense's commitment to enhancing the nation's drone capabilities. The discussions highlighted the urgency of creating a scalable supply chain to support the growing demands of both commercial and military applications in the drone industry.
Defense DL Exclusive Drone Manufacturing Drone News Drone News Feeds Dual Use
Drone killer launches thin metal chains to take down enemy UAVs in seconds
Researchers in Germany have unveiled an innovative drone interceptor designed to enhance aerial security. This cutting-edge technology employs thin metal chains to effectively capture and neutralize rogue drones, addressing growing concerns over unauthorized drone activities. The development comes amid increasing incidents of drone-related threats, particularly in urban areas and near sensitive infrastructure. The new interceptor was tested successfully in various scenarios, demonstrating its ability to entangle and bring down drones without causing collateral damage. This method not only minimizes risks to surrounding environments but also provides a non-destructive solution to drone interference. The research team aims to contribute to public safety and security by offering a reliable defense mechanism against potential drone misuse. As drone technology continues to advance, the need for effective countermeasures becomes increasingly critical, prompting this significant breakthrough in drone interception capabilities.
From phones to robots: China’s supply chain eyes next growth curve in humanoid
China's smartphone and electronics supply chain is pivoting to support the rapidly emerging humanoid robotics industry as component suppliers look for new growth opportunities amid a stagnating mobile market. This shift was highlighted when Honor's humanoid robot D1, a newcomer from the smartphone manufacturer, triumphed in a recent robot half-marathon in Beijing, outperforming established competitors like Unitree. Honor's entry into the humanoid robotics sector marks a significant crossover of expertise from mobile technology to robotics, reflecting the industry's potential for innovation and expansion.
How to avoid supply chain issues as drone and robot production increases exponentially
Researchers predict a significant surge in the production of drones and autonomous robots by the late 2030s, estimating a tenfold increase for commercial drones and a hundredfold increase for humanoid and quadruped robots. This forecast, published in the journal Chem Circularity, highlights potential impacts on the supply chains of 18 essential raw materials used in these technologies, both in the United States and globally. The anticipated rise in demand for rare earth metals and carbon fiber could lead to supply challenges. To mitigate these risks, the researchers recommend that technology developers leverage existing capacities from other industries, particularly electric vehicles, to ensure a stable supply and avoid shortages in critical materials.
Business
Explained: How blockchain secures the future of US drone fleet
The United States drone industry is currently facing significant supply chain challenges that threaten its growth and efficiency. In response to these issues, industry leaders are exploring the potential of blockchain technology as a solution. This innovative approach could enhance transparency and traceability within the supply chain, allowing for more efficient tracking of components and reducing delays. As the demand for drones continues to rise, particularly in sectors such as delivery services and surveillance, addressing these supply chain disruptions has become increasingly urgent. Experts believe that implementing blockchain could streamline operations and foster greater collaboration among manufacturers, suppliers, and logistics providers. The exploration of this technology is gaining momentum as stakeholders seek to secure the future of the drone market in the U.S.
The "One LG" Play: How the Korean Giant is Engineering a Humanoid Supply Chain
LG Group is taking significant steps to strengthen its position in the robotics component market by mobilizing five of its major affiliates. The company aims to offer bundled humanoid subsystems, capitalizing on its extensive manufacturing capabilities in appliances and automotive parts. This strategic move is designed to enhance LG's competitiveness in the rapidly evolving robotics industry, where demand for advanced technology is on the rise. By leveraging its existing resources and expertise, LG Group seeks to establish itself as a leader in providing innovative solutions for robotics applications.
CLOiD South Korea kapex lg-electronics LG
Schaeffler Unveils "All-in-One" Actuator for Humanoids, Targeting the Industry’s Supply Chain Bottleneck
Ahead of CES 2026, a prominent German industrial company has unveiled a fully integrated planetary gear actuator, showcasing its commitment to a dual strategy as both a user and supplier of humanoid hardware. This innovative actuator is expected to enhance the functionality and efficiency of robotic systems, positioning the company at the forefront of advancements in humanoid technology. The announcement highlights the company's ongoing efforts to lead in the robotics sector, emphasizing its role in developing cutting-edge solutions that meet the growing demand for sophisticated automation. With the CES event approaching, the introduction of this technology is likely to attract significant attention from industry leaders and tech enthusiasts alike.
Business Schaeffler Supply ChainRobotics needs a service framework.
RSF defines a common language for robot service capability, lifecycle operations, certification pathways, and service-provider networks.
Join the RobotToday community on LinkedIn
Daily robotics news, in-depth analysis, conference highlights, and discussions with professionals worldwide.
