Industry Briefing
A single destination for timely, editor-curated robotics news from around the world.
Dynamic Pricing Could Enhance Profitability for Air Taxis, Researchers Suggest
Research presented at the Korea Drone and UAM Expo indicates that dynamic pricing could make airport air taxis economically viable. The study, led by Mark Hansen from the University of California, Berkeley, highlights that airport transportation may be a strong commercial opportunity for electric vertical takeoff and landing (eVTOL) aircraft, particularly for routes to Los Angeles International Airport (LAX). The findings suggest that air travel can significantly reduce delays caused by road congestion, appealing to travelers who prioritize time savings. The researchers modeled a network of eight regional vertiports within 30 miles of LAX, estimating passenger demand based on current taxi and rideshare usage. They concluded that while ground travel times vary, UAM flight times remain consistent, offering substantial time savings during peak traffic. A key recommendation from the research is the implementation of variable pricing, akin to surge pricing in rideshare services. This approach could maximize revenue by aligning prices with the time savings perceived by travelers. The study points to Anaheim, California, as a potential market where dynamic pricing could support profitable operations that a fixed pricing model might not sustain.
Advanced Air Mobility Air Taxi Drone News Drone News Feeds Drones in the News News
XSTO Mobility Launches $28,000 X12 Stair-Climbing Robot with AI and LiDAR Technology
XSTO Mobility has unveiled the X12 all-terrain mobility robot, priced at $27,999, designed to assist wheelchair users in overcoming stairs and other obstacles. Weighing approximately 115 kg and capable of carrying up to 136 kg, the X12 features a hybrid wheel-track chassis that allows it to navigate stairs autonomously, with a climbing speed of 25 steps per minute and descending speed of 30 steps per minute. The robot utilizes LiDAR and AI algorithms for real-time terrain perception, enabling it to adjust its driving mode and power output dynamically. The introduction of the X12 is significant as it addresses mobility challenges faced by individuals with disabilities, particularly in environments lacking accessibility features. With the ability to climb slopes of up to 40 degrees and traverse gaps of 300 mm, the X12 offers a solution that goes beyond traditional mobility aids. XSTO Mobility, based in Zhongshan, Guangdong, has been developing embodied mobile robots for over a decade, and the X12 represents a substantial advancement in this field, emphasizing user independence and safety. Looking ahead, XSTO Mobility has reported that orders for the X12 are already booked until April 2026, indicating strong market demand. The robot is currently available in over 70 countries, and its innovative design has garnered multiple awards. No further timeline was disclosed at the time of publication regarding additional product releases or enhancements.
Mobility Robots Assistive Technology AI Healthcare Innovation
Jake Laser Transforms Unitree Robot Dog into Wheelchair for Father’s Mobility
Jake Laser has ingeniously modified a Unitree industrial robot dog into a wheelchair for his father, who has been affected by multiple sclerosis for over 20 years. This innovative device features a hybrid wheeled and walking design, allowing it to navigate various terrains, including stairs and rocky paths, providing newfound mobility for Jake's father. The significance of this transformation lies in its technical ingenuity and emotional impact. By integrating a racing-style seat and recalibrating the robot's software to accommodate his father's weight, Jake ensured that the robot could maintain balance and stability. The project not only enhances mobility but also restores a sense of independence and pride for his father, who can now control the robot using a wireless joystick. Looking ahead, Jake's creation marks a notable advancement in assistive technology, blending robotics with personal mobility solutions. No further timeline was disclosed at the time of publication, but the successful testing of the robot on challenging terrains indicates potential for broader applications in mobility aids for individuals with disabilities.
Assistive Technology Robotics Mobility Solutions Innovation
Who Builds the Sky? How Regional Partnerships Are Creating the Infrastructure for Advanced Air Mobility
In a recent episode of the Drone Radio Show, Lavera Alexander, Chief Growth Officer of the Monterey Bay Economic Partnership (MBEP), emphasized the critical role of regional collaboration, airport infrastructure, and economic development in shaping the future of advanced air mobility. The discussion highlighted that while aircraft technology is essential, the success of this emerging industry relies heavily on the interconnected efforts of local stakeholders. Alexander's insights reflect a growing recognition that building a robust framework for advanced air mobility requires more than just technological advancements; it necessitates a comprehensive approach that integrates community resources and infrastructure planning. The episode serves as a call to action for regions to work together in fostering an environment conducive to the growth of this innovative sector.
Advanced Air Mobility Aerospace Applications Drone News Drone News Feeds News
FAA Moves from Planning to Building for Advanced Air Mobility
The Federal Aviation Administration (FAA) has commenced construction on a new research facility aimed at advancing the integration of advanced air mobility (AAM) into the National Airspace System (NAS). This initiative, which began this week, marks a significant transition from policy development to operational readiness for next-generation vertical flight aircraft. The facility will focus on studying the safe operation of these aircraft alongside existing air traffic, reflecting the FAA's commitment to enhancing air transportation capabilities. This move is part of a broader strategy to ensure that emerging aviation technologies can be effectively and safely incorporated into the national airspace.
Air Taxi Applications Drone News Drone News Feeds eVTOL FAA
A2Z Drone Delivery Joins Kazakhstan’s Alatau City Urban Air Mobility Project
A2Z Drone Delivery, a drone manufacturer based in Torrance, California, has announced a partnership with Alatau Advance Air Group Ltd. to develop next-generation drone infrastructure at the newly established UAM Test Center Eurasia in Kazakhstan. The collaboration, revealed on May 26, 2026, aims to enhance urban air mobility in Alatau City. This initiative reflects a growing commitment to advancing drone technology and its applications in urban environments, positioning both companies at the forefront of the emerging air mobility sector.
Advanced Air Mobility Delivery Drone News Drone News Feeds News Smart Cities
BETA Technologies Completes Multistate Electric Aircraft Flights for Medical Logistics
BETA Technologies has successfully conducted a series of electric aircraft flights spanning Virginia and Maryland, as part of the FAA’s eVTOL Integration Pilot Program. The flights covered approximately 275 nautical miles, connecting airports in Blacksburg and Charlottesville, Virginia, to Frederick and Baltimore County, Maryland. This achievement marks a significant milestone in evaluating advanced air mobility within existing airspace systems. The significance of these flights lies in their potential to enhance medical logistics, particularly in organ delivery operations. BETA Technologies is collaborating with United Therapeutics to develop electric aircraft systems that aim to make organ transportation more affordable and sustainable. The partnership has already led to advancements in aircraft design, autonomous flight technologies, and charging infrastructure, with over 160,000 nautical miles of flight testing completed to date. Looking ahead, the eVTOL Integration Pilot Program will continue to provide valuable data to inform future certification rules and operational standards for advanced air mobility. The Pennsylvania Department of Transportation, leading the Multistate Collaborative eIPP National Integration Complex, is working with multiple states and industry stakeholders to further develop and test these innovative aviation technologies. No further timeline was disclosed at the time of publication.
Transportation
Tesla's Optimus Robots to Support Starmind Satellite Production, Not Maintenance
Tesla's Optimus robots will not be used to repair Starmind satellites in orbit, as confirmed by recent statements from Elon Musk. Instead, these robots are intended to assist in the construction and operation of the Terafab chip manufacturing facility in Texas. The AI1 satellites, designed to disintegrate upon reentry, highlight the company's swap-and-replace strategy rather than traditional maintenance practices. This approach is significant as it reflects a broader trend in satellite management, where mass-produced satellites are replaced rather than repaired. The economics of servicing missions are prohibitive, with the cost of launching a replacement satellite being significantly lower than conducting a repair mission. This model aligns with SpaceX's operational history, where rapid replacement of satellites is more efficient than attempting to maintain them in orbit. Looking ahead, the focus will remain on the production capabilities of the Gigasat factory, which is expected to support the continuous replacement of satellites. No further timeline was disclosed at the time of publication, but the demand for rapid satellite turnover suggests a robust future for Optimus robots in terrestrial manufacturing rather than in-space servicing.
A&K Robotics Raises $8 Million to Build Autonomous Mobility Infrastructure for Airports
A&K Robotics has secured an $8 million CAD Series A investment to develop autonomous mobility infrastructure for airports, addressing the growing challenges faced by passengers with mobility limitations. The funding round, announced on April 21, 2026, was led by the Business Development Bank of Canada’s Industrial Innovation Venture Fund and Vantage Futures, alongside other investors. With approximately 17% of the global population experiencing mobility challenges and a 10-15% annual increase in requests for airport assistance, A&K Robotics aims to enhance passenger experience through its self-driving mobility robot, Cruz. Designed to navigate complex indoor environments like airport terminals, Cruz autonomously transports passengers to their destinations while safely maneuvering around pedestrians. The company is already collaborating with major airport operators, including Vancouver International Airport and Madrid-Barajas Airport, to integrate this technology into daily operations. A&K Robotics’ CEO, Matthew Anderson, emphasized the importance of improving airport navigation, stating, "Air travel is chaotic enough — getting to your gate shouldn't be part of the problem." The investment will support A&K's expansion into large-scale deployments, helping airports enhance operational efficiency and passenger accessibility while paving the way for the future of autonomous mobility in complex indoor environments.
SpaceX's Starship V3 Plans for 1 Million Starmind Satellites by 2030
SpaceX's Starship V3 is set to revolutionize satellite deployment, aiming to launch 1 million Starmind satellites by 2030. The spacecraft can carry over 100 tonnes to low Earth orbit (LEO), significantly more than the Falcon 9's capacity. As of May 2026, Starship has completed 12 flights, with the next mission scheduled for late July 2026, focusing on operational payloads including AI1 prototypes in early 2027. This ambitious plan is crucial for expanding orbital compute capacity, targeting an annual addition of 100 GW through a million tonnes of satellite hardware. SpaceX's strategy hinges on achieving a launch cadence of approximately 12,000 flights, equating to about three launches per day. The company has invested over $15 billion in the Starship program, with expectations to begin payload deliveries in the second half of 2026, starting with Starlink V3 satellites. Looking ahead, the successful deployment of the Starmind constellation will depend on Starship's ability to meet its cost targets of $10–20 million per flight. If achieved, this would make launching satellites more economical than building ground data centers. The next significant milestone will be the launch of AI1 prototypes in early 2027, with full-scale deployments commencing in 2028 from the new Gigasat factory in Texas.
Rovex and Sphaira pioneer autonomous patient transport
In a significant advancement for hospital operations, Rovex and Sphaira are leading the way in automating patient mobility. These innovative companies are exploring distinct approaches to enhance the efficiency and safety of patient transport within healthcare facilities. As hospitals increasingly seek solutions to streamline their processes, the introduction of autonomous systems aims to alleviate the burden on staff and improve patient experiences. The push for automation in this area reflects a growing recognition of the potential benefits technology can bring to healthcare environments.
Autonomous Mobile Robots (AMRs) Healthcare Robotics Mobility / Navigation News Opinion Startups
Michigan’s Bet on the Low Altitude Economy: How M Air Connects Aerospace Innovation and Detroit Manufacturing
At XPONENTIAL 2026, leaders from the University of Michigan presented a forward-looking vision aimed at establishing the state as a key player in the low altitude economy, particularly in the realms of drones and advanced air mobility (AAM). This initiative seeks to leverage Michigan's aerospace innovations alongside Detroit's robust industrial manufacturing capabilities. The discussion highlighted the potential for Michigan to become a central hub for these emerging technologies, emphasizing the synergy between cutting-edge aerospace developments and the region's manufacturing expertise.
Advanced Air Mobility Aerospace Applications Autonomous DL Exclusive Drone Manufacturing
From The Floor of XPONENTIAL: AIRO and Jaunt Reveal Dual-Use VTOL Aircraft for Defense and Cargo Missions
At the AUVSI XPONENTIAL 2026 event in Detroit on May 12, AIRO Group Holdings showcased its full-scale autonomous vertical takeoff and landing (VTOL) aircraft, developed in collaboration with Jaunt Air Mobility. This innovative aircraft is designed to serve dual purposes in defense, specifically for intelligence, surveillance, reconnaissance (ISR), and cargo logistics, as well as remote operations. The unveiling highlights the growing interest in autonomous technology within the aerospace and defense sectors, aiming to enhance operational efficiency and versatility in various mission scenarios.
Cargo Defense defense Delivery Drone News Drone News Feeds
AI Aims for Autonomous Wheelchair Navigation
Researchers from the German Research Center for Artificial Intelligence (DFKI) in Bremen, led by Christian Mandel and Serge Autexier, are exploring the potential of AI-powered smart wheelchairs to navigate complex environments more effectively than traditional systems. Their findings were presented earlier this month at the CSUN Assistive Technology Conference in Anaheim, California. The team developed prototype electric wheelchairs equipped with advanced sensors, including lidar and 3D cameras, to detect and avoid obstacles in real-time. The smart wheelchairs operate in both semiautonomous and fully autonomous modes. In semiautonomous mode, users control the wheelchair via a joystick, while in autonomous mode, they can issue commands using natural language, such as asking the wheelchair to navigate to a specific location. The research is part of a larger initiative called REXASI-PRO, aimed at enhancing mobility for individuals with severe disabilities. Despite the advancements, challenges remain, particularly regarding cost, reliability, and the need for tailored solutions that accommodate diverse user needs. Pooja Viswanathan, CEO of Braze Mobility, emphasized the importance of making these technologies accessible to everyday consumers. The researchers anticipate that smart wheelchairs could be available in the mainstream market within the next decade, with a focus on creating partnerships between users and technology rather than replacing human control. The ongoing work aims to ensure that smart wheelchairs are safe, reliable, and capable of adapting to the complexities of real-world environments.
Wheelchairs Taenzer-fellowship Navigation Artificial-intelligence
Airbus debuts U145 autonomous helicopter drone with no cockpit for military missions
Airbus Helicopters has unveiled a new autonomous aircraft derived from its widely-used H145 platform, marking a significant advancement in aviation technology. The announcement was made during the International Paris Air Show, which took place from June 19 to June 25, 2023. This innovative aircraft aims to enhance operational efficiency and safety in various sectors, including medical transport, search and rescue, and logistics. The motivation behind this development stems from the growing demand for unmanned aerial vehicles that can perform complex missions with minimal human intervention. By leveraging advanced automation and artificial intelligence, Airbus Helicopters seeks to address challenges in urban air mobility and improve response times in critical situations. The aircraft is designed to operate in diverse environments, showcasing its versatility and potential for integration into existing air traffic systems. Through rigorous testing and collaboration with regulatory bodies, Airbus aims to ensure that the new autonomous H145 meets safety standards and can be deployed effectively in real-world scenarios. This initiative reflects Airbus Helicopters' commitment to innovation and its vision for the future of aviation, where autonomous systems play a crucial role in enhancing air transport capabilities.
This DIY Bipedal Robot Used Pneumatic “Air-Muscles” Instead of Motors
In 1987, British photographer Richard Greenhill, driven by a passion for robotics, initiated a weekly gathering in his attic to develop a life-size humanoid robot, the Shadow Walker, capable of performing practical tasks like carrying luggage. Unable to secure support from his startup, Intergalactic Robots, Greenhill enlisted the help of a group of DIY enthusiasts, known as the Shadow Group, who met every Wednesday to work on the project, fueled by homemade spaghetti dinners. With contributions from robotics expert David Buckley, the team designed the robot using a simplified skeletal structure and pneumatic "air-muscles" for movement, aiming to achieve balance and mobility. Despite their efforts, the Shadow Walker struggled to walk, ultimately failing to compete effectively at the 1st International Robot Olympics held in Glasgow in September 1990, where it was outperformed by other entries. The Olympics showcased over 50 robots from various countries, highlighting both the advancements and limitations in robotics at the time. While the Shadow Walker did not succeed in its primary goal, it laid the groundwork for future developments in robotics. In 1997, the Shadow Group transitioned into a registered company, Shadow Robot, which now focuses on creating advanced robotic hands, reflecting a shift from walking robots to specialized dexterity in robotic technology. Despite significant progress in robotics, the journey toward creating truly functional humanoid robots continues.
Past-forward Type-departments Humanoid-robots Shadow-robot Walking-robots Pneumatic-robots
GMO Internet Group to Exhibit as Platinum Sponsor at Japan Drone 2026, Aiming to Address Airport Labor Shortages with Humanoids.
GMO Internet Group will participate as a Platinum Sponsor at Japan's largest drone and eVTOL international exhibition, "Japan Drone / Next Generation Air Mobility EXPO 2026," scheduled to take place from June 3 to June 5, 2026, at Makuhari Messe. This event aims to showcase advancements in drone technology and air mobility solutions, reflecting the growing interest and investment in the sector. By taking on a leading sponsorship role, GMO Internet Group underscores its commitment to innovation and its strategic focus on the future of transportation.
Electric air taxis move closer to reality as VX4 completes critical transition test
Vertical Aerospace has successfully completed the first piloted flight of its VX4 electric vertical take-off and landing (eVTOL) aircraft. This significant milestone occurred recently, marking a crucial step in the development of sustainable urban air mobility solutions. The flight took place at the company’s testing facility, showcasing the aircraft’s capabilities and potential for revolutionizing transportation in urban environments. The successful test is part of Vertical Aerospace's broader mission to provide eco-friendly air travel options, aiming to reduce carbon emissions and alleviate congestion in cities. The company plans to continue testing and refining the VX4, with the goal of bringing it to market in the near future.
From Lab to Pavement: PNDBotics Adam Humanoid Demonstrates Real-World Stair Navigation
PNDBotics has unveiled a new video demonstrating the impressive advancements of its Adam humanoid robot, which has progressed from tethered laboratory prototypes to successfully navigating complex outdoor stairs. This significant development highlights the rapid evolution of the robot's capabilities in 2026. The video showcases the robot's enhanced mobility and adaptability, marking a pivotal moment in the field of robotics as it moves towards real-world applications. The demonstration reflects ongoing efforts to improve humanoid robots for various tasks, emphasizing the potential for future integration into everyday environments.
pndbotics China adam
CMU Collaborates on Project To Develop Future Robotic Wheelchair
Researchers at Carnegie Mellon University are embarking on a federally funded initiative aimed at reimagining and redesigning wheelchairs to enhance mobility through the integration of advanced technologies. This collaborative project seeks to develop innovative robotic wheelchairs that will improve the user experience and accessibility for individuals with mobility challenges. The effort underscores a commitment to leveraging cutting-edge research to create more functional and adaptive mobility solutions.
Research
1X Reveals the RL Core That Gives Its NEO Humanoid Fluid, Whole-Body Mobility
Robotics firm 1X has revealed the advanced reinforcement learning system that drives the movement of its NEO humanoid, following the introduction of its Redwood AI brain. This innovative unified controller allows the robot to perform a variety of human-like actions, including walking, running, and climbing stairs, utilizing only stereo vision for navigation. The announcement highlights 1X's commitment to enhancing robotic mobility and intelligence, showcasing the potential for humanoid robots to interact more naturally within human environments.
reinforcement-learning 1X-technologies Redwood humanoid-robots locomotion robotics-ai
Kazakhstan is designing a city around drone deliveries and air taxis
Kazakhstan is embarking on an ambitious project to construct a new smart city that will integrate drones and flying transportation systems from its inception. This initiative aims to position the country as a leader in innovative urban development within Central Asia. The project reflects Kazakhstan's commitment to modernizing its infrastructure and embracing advanced technologies to enhance urban living. By focusing on aerial transportation, the city is expected to alleviate ground traffic congestion and improve overall mobility for residents. The development is part of a broader strategy to diversify the economy and attract investment in cutting-edge technologies. As construction progresses, the city is set to become a model for future urban planning, showcasing how advanced transport solutions can be seamlessly integrated into everyday life.
News
Path Robotics Launches Rove, Bringing Mobility to Welding Automation Powered by Physical AI
Path Robotics has unveiled Rove™, a mobile robotic welding system that integrates its advanced Obsidian™ physical AI model with a quadruped robot, marking a significant advancement in welding automation. Announced on April 16, 2026, this innovative system allows for intelligent welding directly at the workpiece, rather than requiring the part to be moved to a fixed welding cell. This development comes at a crucial time as industries face skilled welder shortages and the challenges of large-scale fabrication environments, such as shipbuilding and heavy construction. Rove is designed to operate effectively in high-variability settings, overcoming the traditional limitations of legged robots in precision welding. Early adopter Saronic Technologies, a leader in autonomous maritime vessels, is set to evaluate Rove's capabilities in its shipbuilding operations in Franklin, Louisiana. John Morgan, Head of Manufacturing at Saronic, emphasized the importance of adaptable tooling in modernizing shipyard operations. The Rove system will be showcased at the Sea-Air-Space 2026 maritime expo in National Harbor, Maryland, from April 19 to 22, where attendees can witness its capabilities firsthand. Path Robotics aims to revolutionize manufacturing processes by combining artificial intelligence, machine learning, and computer vision to enhance production quality and efficiency. For more information, interested companies can visit Path Robotics' website.
Comau to participate in CWIEME 2025 with advanced solutions for the production of hairpin/minipin stators and innovations for electric drive systems
Comau showcased its innovative cell formation and e-mobility solutions at the Battery Show held in Stuttgart, Germany. The event took place recently, bringing together industry leaders and experts to explore advancements in battery technology. Comau's participation highlights its commitment to enhancing manufacturing processes in the rapidly evolving electric vehicle sector. By presenting their latest technologies, the company aims to address the growing demand for efficient and sustainable energy solutions in the automotive industry. The display included demonstrations of cutting-edge automation and robotics designed to optimize battery production, reflecting Comau's strategic focus on supporting the transition to electric mobility.
SkyDrive Conducts Successful SD-05 Flights in Yamaguchi for 2028 Tourism Initiative
SkyDrive Inc. successfully conducted two demonstration flights of its SD-05 eVTOL aircraft in Yamaguchi Prefecture on July 13, 2026. These flights were part of a test aimed at showcasing the aircraft's potential for tourism, with a commercial launch planned for 2028. The flights simulated a scenic tour over the Seto Inland Sea, highlighting the seamless transition from ground transport to air travel. The significance of these flights lies in their demonstration of SkyDrive's commitment to urban air mobility and tourism integration. Witnessed by notable figures including Yamaguchi Prefecture's governor and the president of Suzuki Motor Corporation, the flights operated autonomously, emphasizing safety and efficiency. The successful execution of these flights marks a critical step toward the company's goal of launching commercial eVTOL services by 2028. Looking ahead, SkyDrive aims to enhance its eVTOL infrastructure further, with plans to collaborate with rail partners for integrated travel solutions. While tourism is a primary focus, the company envisions broader applications of eVTOL technology, including disaster relief and emergency medical services. No further timeline was disclosed at the time of publication.
Advanced Air Mobility Drone News Drone News Feeds Japan Drone Industry Japan Drone News News
SkyDrive Signs First Japanese Helicopter Operator for SD-05 eVTOL
Tohoku Air Service (TAS), a subsidiary of Tohoku Electric Power, has entered into a letter of intent with SkyDrive for the acquisition of one SKYDRIVE SD-05 electric vertical takeoff and landing (eVTOL) aircraft. The agreement, announced on May 13, 2026, marks a significant milestone as it establishes TAS as the first helicopter operator in Japan to commit to the SKYDRIVE model. The delivery of the eVTOL is anticipated for 2028, reflecting SkyDrive's strategy to expand its presence in the aviation market. This partnership underscores the growing interest in innovative air mobility solutions within Japan's transportation sector.
Advanced Air Mobility Drone News Multi-rotor News Urban Air Mobility VTOL
Hello Robot Sets the Standard for Practical, Safe Home Robots
Hello Robot has announced the launch of Stretch 4, a new version of its mobile robot designed for practical household tasks. This announcement comes as the company aims to transition from research-focused robotics to a deployable solution for home use, particularly for individuals with severe mobility impairments. The unveiling took place today, with the robot's design emphasizing mobility and manipulation over humanoid features. Stretch 4 features an advanced omnidirectional base allowing it to move in any direction, enhancing user control. The robot is equipped with a sophisticated sensor suite for improved navigation and autonomy, including cameras and lidar technology. Co-founders Aaron Edsinger and Charlie Kemp highlighted the challenges faced during the design process, aiming to avoid overcomplicating the robot while ensuring it meets real-world needs. The robot is intended for pilot deployments in homes, with the goal of gathering data to refine its capabilities for everyday use. Unlike humanoid robots, which may not effectively serve individuals with disabilities, Stretch 4's wheeled design is seen as more practical and safer for home environments. Priced at $29,950, Stretch 4 is positioned as an affordable option in the mobile manipulation market, with plans for further development leading to a commercially viable assistive robot in the near future.
Hello-robot Home-robots Humanoid-robots Mobile-manipulator Mobility-impaired
SkyDrive, Osaka Metro Launch Japan’s First eVTOL Vertiport Consortium
SkyDrive, a company specializing in electric vertical takeoff and landing (eVTOL) aircraft and affiliated with Toyota, has announced the formation of Japan's first consortium aimed at commercializing the Osakako Vertiport located on Osaka Bay. This initiative, which includes partners such as Osaka Metro, Marubeni, Soracle, and various local governments, was unveiled on May 8, 2026. The consortium's goal is to facilitate the commercial operation and shared use of the vertiport, marking a significant step in advancing urban air mobility in Japan. By collaborating with key stakeholders, SkyDrive aims to enhance transportation options in the region and promote the integration of eVTOL technology into everyday travel.
Advanced Air Mobility Drone News Drone News Feeds Japan Drone Industry Japan Drone News News
NASA Picks Pierce Aerospace for Bay Area Remote ID Sensor Network
Pierce Aerospace has been selected by NASA to develop a Remote ID network throughout Silicon Valley and the San Francisco Bay Area. This initiative is part of NASA's ongoing research into drones and air taxi technologies, specifically at the Ames Research Center. The project will involve the deployment of YR1 and YR2S sensors, facilitated by Metis Technology Solutions, an Indiana-based firm. The collaboration aims to enhance the safety and efficiency of unmanned aerial systems in urban environments, addressing the growing need for regulatory frameworks as drone usage expands. The timeline for the deployment and operational details has not been disclosed, but the network is expected to play a crucial role in advancing aerial mobility solutions in the region.
Drone News Drone News Feeds infrastructure Networking News Sensors
Indonesia grants world-first overseas certification validation to AutoFlight eVTOL
AutoFlight's V2000CG CarryAll has achieved a significant milestone by receiving a Validated Type Certificate (VTC) in Indonesia, marking it as the first electric vertical takeoff and landing (eVTOL) aircraft to obtain such certification outside of its home country. This certification, formally issued by Indonesia's Directorate General of Civil Aviation (DGCA), verifies that the V2000CG meets the airworthiness standards set by both the Civil Aviation Administration of China (CAAC) and the Indonesian aviation authority. This development underscores the growing international recognition and compliance of innovative aviation technologies, paving the way for broader acceptance and integration of eVTOL aircraft in global airspace.
Aircraft News advanced air mobility air cargo autoflight automation news
Engineers Create Autonomous Four-Legged Robot That Adapts Gait to Environment
Engineers have developed a groundbreaking four-legged robot capable of autonomously determining its walking strategy based on its environment. This innovative robot can adjust its gait when navigating stairs, leap over gaps, and maintain balance on uneven forest trails. The significance of this development lies in its potential applications across various fields, including search and rescue operations, outdoor exploration, and even entertainment. By mimicking the adaptive movement of animals and humans, this robot represents a significant advancement in robotics, enhancing mobility and versatility in challenging terrains. Looking ahead, the focus will be on further refining the robot's capabilities and exploring its deployment in real-world scenarios. No further timeline was disclosed at the time of publication.
Robotics
FAA Announces Successful Interstate eVTOL Organ Transport Test with BETA Technologies and United Therapeutics
The Federal Aviation Administration (FAA) has reported a significant achievement in Advanced Air Mobility (AAM) with BETA Technologies and United Therapeutics Corporation completing an interstate flight test. This test involved the transportation of a donor organ using an electric aircraft as part of the FAA’s eVTOL Integration Pilot Program (eIPP). This milestone is crucial as it demonstrates the potential of electric vertical takeoff and landing (eVTOL) technologies to enhance time-sensitive medical logistics. The flight, which transported an animal organ from Virginia to Maryland, involved multiple aircraft and airports, aiming to assess the reliability of electric aircraft for critical organ delivery missions. Looking ahead, the FAA and its partners plan to conduct further flight tests throughout the year to gather more operational data. This initiative is part of a broader effort to integrate Advanced Air Mobility aircraft into the National Airspace System, ultimately aiming to support new transportation services and establish operational standards for future commercial operations.
Applications Delivery Drone News Drone News Feeds FAA Featured - FAA and Regulations
SkyDrive Partners with Japan Biz Aviation for 2028 eVTOL Launch Framework
SkyDrive Inc., a Toyota-based eVTOL manufacturer, has partnered with Japan Biz Aviation Co., Ltd. to establish a commercial framework for its eVTOL launch by 2028. This memorandum of understanding, announced on July 9, 2026, will leverage JBZ's expertise in operating HondaJet and Bell 429 helicopters to facilitate eVTOL flights in Japan. SkyDrive currently holds orders for 427 aircraft, including 354 pre-orders and 73 purchase agreements, with a notable 20-unit order from AeroGulf Services in Dubai. The collaboration is significant as it aims to bridge the operational gap for domestic buyers, many of whom lack an air operator’s certificate. SkyDrive plans to engage experienced operators to support commercial flights, enhancing the viability of eVTOL technology in Japan. The agreement follows SkyDrive's earlier partnership with a Japanese helicopter operator and underscores the importance of operational frameworks in promoting advanced air mobility. Looking ahead, SkyDrive is actively pursuing type certification with civil aviation authorities in both Japan and the United States, with a target service entry in 2028. Production of the SKYDRIVE aircraft commenced in March 2024, and the company plans to showcase its eVTOL capabilities during demonstration flights at the 2025 Osaka Expo. No further timeline was disclosed at the time of publication.
Advanced Air Mobility Air Taxi Drone News Drone News Feeds Japan Drone Industry Japan Drone News
ABB Robotics completes its AI-powered Visual SLAM AMR portfolio with new autonomous forklift
ABB Robotics completes its AI-powered Visual SLAM AMR portfolio with new autonomous forklift Visit http://go.abb/robotics for further information -The new Flexley Stack F712 extends ABB Robotics’ AI-powered Visual SLAM technology to autonomous forklifts, enabling pallet transport and high-density storage. -Customers can now deploy mixed fleets of Visual SLAM-powered tugs, movers and forklifts on a common navigation, fleet management and software platform. -Powered by ABB Robotics' AMR Studio, the portfolio enables up to 20% faster commissioning while ensuring seamless interoperability and safe, reliable operation. 07/07/26, 07:10 AM | Industrial Robotics, Mobile Robots | ABB Inc. ABB Robotics is expanding its Autonomous Mobile Robotics (AMR) portfolio with the launch of the Flexley® Stack F712, creating a complete interoperable ecosystem across all major Visual SLAM AMR types. Combining autonomous forklifts, tugs and movers on one platform, ABB Robotics enables customers to automate a broader range of material-handling and intralogistics processes. Offering market-leading accuracy, the F712 is designed for demanding material handling, end-of-line storage and warehouse operations across industries including automotive manufacturing, helping increase efficiency, flexibility and scalability. More Headlines A3's Automate 2026 Breaks Records as Demand for Robotics, AI and Automation Grows NVIDIA and Hugging Face Bring New Models and Frameworks to LeRobot for the Open Robotics Community Palladyne AI Executes $4.2 Million U.S. Air Force Contract to Advance Swarming Capabilities for Integrated Cross-Domain Operations UMA Unveils Its Vision for the Next Generation of Humanoid Robots Robbyant Unveils LingBot-Depth 2.0 and LingBot-Vision to Redefine Robotic Spatial Perception Articles Unleash AI Innovation: The Power of NVIDIA RTX PRO 6000 Blackwell Workstation Edition Fueled by PNY-Supplied GPUs Automate 2026 Q&A with DESTACO Automate 2026 Q&A with Roboteon Advances in Robots to See & Interpret within Warehouse Environments Building Resilient Fulfillment Networks with Robotics and Real-Time Logistics Data "Across intralogistics operations, businesses are being asked to process greater volumes in less time, while working with increasingly limited resources," said Marc Segura, President, ABB Robotics. "They are under pressure to move goods faster and with greater flexibility, while labour availability is becoming a critical constraint. As part of our journey to more autonomous and versatile robotics (AVRTM), we have combined advanced vision, mobility and intelligence in the Flexley Stack F712 forklift AMR, completing our scalable, AI-powered AMR portfolio." F712 is versatile, capable of handling multiple load types and sizes - including open and closed pallets, containers or racks- up to 2,000 kg and reaching heights of 8.5 meters. The Flexley Stack AMR F712 joins the Flexley Tug and Flexley Mover in ABB Robotics' growing Visual SLAM AMR portfolio. Applications include intralogistics tasks such as warehouse storage and retrieval, as well as line supply, end-of-line handling, body- and press-shop and drive-in and light buffer in the automotive and industries sector. Unlike conventional AMR forklifts on the market, F712 uses Visual SLAM to map and navigate its environment, eliminating the need for pre-installed infrastructure like markers or reflectors. The AI-enabled Visual SLAM supports the autonomous decisions required to operate in complex, dynamic warehouse operations with a market-leading positional accuracy of ±10 mm. Together with AMR Studio®, this shortens commissioning times by up to 20 percent and creates a versatile and reliable system that can adapt instantly when a warehouse or production floor layout changes. Certified to the latest ISO and ANSI safety standards, Flexley Stack F712 can safely operate at class-leading speeds of up to 1.7 m/s while loaded. F712 is fully integrated with AMR Studio and is VDA5050 compatible, enabling seamless integration with ABB Robotics' Visual SLAM AMRs and existing systems within a unified project. This makes it easy to manage complex projects and integrate different types of mobile robots. The no-code, drag-and-drop software suite supports rapid setup, fleet coordination, traffic management and real-time visualization, allowing ABB Robotics' tugs, movers and forklifts to operate together in the same layout for scalable turnkey automation projects. ABB Robotics as one of the world's leading robotics companies, is the only company with a comprehensive and integrated AI-powered portfolio covering robots, cobots and Autonomous Mobile Robots (AMRs), designed and orchestrated by our value-creating software. We help companies of all sizes and sectors - from automotive to electronics and logistics - to outperform by becoming more resilient, flexible and efficient. ABB Robotics is at the forefront of developing and commercializing a new generation of Autonomous Versatile Robotics
Drone industry leader urges Japan and Taiwan to get on same regulatory page
In a recent interview, a prominent leader from Japan's drone industry emphasized the need for Japan and Taiwan to align their drone regulations. Speaking at the Japan Drone 2026 and International Advanced Air Mobility Expo in Chiba on June 5, the official urged Tokyo to reconsider its restrictions on defense cooperation to foster stronger business ties between the two nations. The call for regulatory harmonization comes amid growing concerns over Taiwan's drone industry, which has faced uncertainty due to budget cuts. The leader's remarks highlight the importance of collaboration in the aerospace sector, particularly as tensions in the region continue to rise. The push for unified regulations aims to enhance cooperation and innovation in drone technology, ultimately benefiting both countries' defense capabilities and economic interests.
World’s first Mach 2.5 test platform to blast hypersonic materials through storms
A U.S. aerospace company has introduced what it claims to be the world's first commercial platform designed for urban air mobility. The announcement was made during a press conference held on October 15, 2023, at the company's headquarters in California. This innovative platform aims to revolutionize transportation in densely populated areas, addressing the growing need for efficient and sustainable urban transit solutions. The company’s executives highlighted that the development is motivated by increasing urban congestion and the demand for faster travel options. The platform is expected to utilize advanced electric vertical takeoff and landing (eVTOL) technology, enabling it to operate in urban environments while minimizing noise and emissions. The unveiling marks a significant milestone in the aerospace industry, as the company plans to collaborate with city planners and regulatory bodies to ensure the safe integration of this new mode of transportation into existing urban infrastructures.
Military
BilibiliWorld 2026 is China's first overseas ticketed ACG event; 17 measures to promote AI in consumer development; Kuaizhou-11 rocket successfully
Didi Autonomous Driving showcased its advancements in self-driving technology at the MOVE 2026 conference held in London on June 17-18. The company highlighted its achievement of L4-level core technology and the delivery of its new Robotaxi model, R2, developed in collaboration with GAC Aion, which is currently undergoing road tests in cities like Guangzhou and Beijing. Since launching all-weather passenger testing in select areas last year, Didi has maintained a safe and stable operational performance. On June 18, Cainiao's Vice President Bi Jianghua announced plans to deploy four large-scale climbing robot warehouses globally within the next four months, following successful trials during the 618 shopping festival. This initiative aims to enhance the efficiency of e-commerce supply chains. DingTalk's new CEO, Chen Yusen, communicated organizational changes in a company-wide letter, establishing a core platform business department and integrating various teams to streamline operations. The State Administration for Market Regulation is overseeing an antitrust compliance rectification for Huolala, mandating the cessation of practices that unreasonably lower freight prices and enforcing fair pricing algorithms. The company is expected to refund 1.2 billion yuan to drivers and reduce its commission rates. Additionally, Cao Cao Mobility announced its RoboX strategy at the International Automotive and Supply Chain Expo in Hong Kong on June 18, planning to deploy 100,000 Robovans by 2030 to enhance logistics networks. BilibiliWorld 2026 will be the first comprehensive ACG exhibition in China to offer overseas ticket sales, with tickets available globally starting June 20, for the event scheduled from July 10-12 in Shanghai. KKR has committed $1.4 billion to expand Altavair's commercial aircraft leasing portfolio, while Manifold AI has secured nearly 1 billion yuan in Pre-A funding. In economic news, Goldman Sachs suggests the Federal Reserve may need to implement consecutive rate hikes in September if inflation remains high. Meanwhile, Hong Kong plans to launch five-year government bond futures on August 3, 2026. The Ministry of Commerce has introduced 17 measures to promote the integration of artificial intelligence into consumer markets.
How Musicians Can Get Paid for Training AI
In response to the challenges posed by generative AI on the music industry, startups like Sureel and SoundVerse are developing innovative solutions to ensure musicians are compensated fairly for their work. Following Warner Music Group's acquisition of Sureel, the company has partnered with the Swedish copyright agency STIM to create a system that tracks how music is used in AI training. This software allows creators to specify the terms of use for their music, ensuring they receive royalties based on its influence in AI-generated outputs. The ongoing debate centers on how to accurately attribute the contributions of various training data to the outputs produced by AI systems. SoundVerse advocates for a model that rewards artists continuously throughout the AI lifecycle, rather than through one-time payments. This approach aims to maintain the economic incentives that drive creativity while addressing concerns about AI's potential to undermine cultural vibrancy and artist livelihoods. As copyright lawsuits give way to negotiated agreements between major music labels and AI companies, there is a growing opportunity to establish fair compensation practices. Experts emphasize the need for transparent and equitable attribution systems that reflect the complex relationship between training data and AI outputs. Ultimately, the success of these initiatives may depend on collaboration across disciplines, including musicology, law, and economics, to create policies that support a sustainable creative sector in the age of AI.
Copyright Training-data Generative-ai Music
Innovative Rat Exoskeleton Aids Neural Rehabilitation Research
A research team at Tsukuba University has unveiled a groundbreaking lightweight exoskeleton designed for rats, which weighs just 80 grams and effectively mimics natural walking by synchronously activating the hip, knee, and ankle joints. This innovative device represents a significant advancement in rehabilitation robotics, with the potential to help paralyzed patients regain mobility. The development is rooted in insights gained from animal studies, addressing ethical concerns that often arise in human trials. By leveraging these findings, the team aims to pave the way for future applications that could enhance the quality of life for individuals with mobility impairments.
Rehabilitation Robotics Exoskeleton Technology Neural Rehabilitation Biomechanics
LG, Nvidia chiefs pledge to cooperate on robots, AI data centers
LG Group Chairman Koo Kwang-mo and Nvidia CEO Jensen Huang convened on Monday at LG Twin Towers in Yeouido, western Seoul, to explore potential collaborations in robotics, AI data centers, and mobility. The meeting, characterized by LG as a top management discussion, was attended by LG Vice Chairman and COO Kwon Bong-seok and LG Electronics CEO Lyu Jae-cheol. This encounter marked the second meeting between Koo and Huang within three days, following a dinner on Friday in Hongdae that included the chairmen of SK and Naver. The discussions reflect a growing interest in leveraging advanced technologies to enhance operational capabilities and foster innovation in various sectors.
All News
Robot Talk Episode 158 – Autonomous robot deliveries, with Ahti Heinla
In a recent conversation, Claire spoke with Ahti Heinla, co-founder and CEO of Starship Technologies, a pioneer in the field of autonomous delivery. The discussion focused on the company's innovative AI-powered delivery robots, which are designed to navigate streets and pavements independently. Starship Technologies has established itself as a leader in the autonomous delivery market, leveraging advanced technology to create robots that operate seamlessly in real-world environments. Heinla, who was also instrumental in the development of Skype, highlighted the growing demand for efficient delivery solutions and the role of AI in transforming logistics. The conversation underscored the potential of these robots to enhance urban mobility and streamline last-mile delivery services, reflecting a significant shift in how goods are transported in increasingly congested cities.
China to promote drones and flying cars via new safety department
The Chinese government has launched a new agency aimed at promoting the development and operation of drones and flying cars, signaling a significant push into the low-altitude economy. This initiative, announced on May 26, 2026, in Guangzhou, is part of a broader strategy to double the country's low-altitude economy over the next decade. The establishment of this agency comes as Chinese drone startup EHang has made headlines by becoming the first company in China to secure an operating license for its flying taxi service. This move reflects China's ambition to enhance its technological capabilities in the aviation sector and capitalize on emerging markets in urban air mobility. The government’s support is expected to facilitate innovation and regulatory frameworks that will enable the safe integration of these advanced aerial vehicles into the national airspace.
Rajant Health (RHI) and Chord Robotics Expand Cowbell Platform to Enable Scalable, Multi-Domain Collaborative Autonomy
Rajant Health (RHI) and Chord Robotics have announced an expanded partnership to enhance their Cowbell platform, introducing advanced "Flying Cowbell" capabilities aimed at enabling scalable, multi-domain collaborative autonomy. This collaboration, revealed on May 22, 2026, integrates RHI's Kinetic Mesh® networking with Chord Robotics' TEMPO™ software, facilitating real-time control of mixed fleets operating across air, land, and sea. The "Flying Cowbell" system transforms mobile nodes, including unmanned aerial systems (UAS) and unmanned surface vehicles (USVs), into active participants in a distributed compute and autonomy framework. This architecture allows for distributed workload execution, dynamic cluster formation, and transport-agnostic operations, even in connectivity-constrained environments. The partnership aims to address the need for persistent coverage and dynamic mission adaptation in complex scenarios where traditional infrastructure may be lacking. By leveraging Rajant's InstaMesh® networking capabilities alongside TEMPO, operators can manage heterogeneous fleets effectively, ensuring that each vehicle can make independent decisions while collaborating seamlessly. RHI's CEO, Robert J. Schena, emphasized that the initiative represents a shift from static infrastructure to a mobility-native system, while Chord Robotics' CEO, James Cooney, highlighted the potential for scaling autonomous fleets in challenging environments. Together, the companies are poised to redefine collaborative autonomy in unmanned systems, enhancing operational efficiency and adaptability.
Hybrid-electric eVTOL could fly troops and military supplies across 1,000 miles
Vertical Aerospace, a UK-based company, has initiated testing of its innovative hybrid-electric aircraft designed to transport passengers. The testing phase commenced recently at an undisclosed location, marking a significant step in the development of sustainable aviation technology. This aircraft aims to reduce carbon emissions and enhance urban air mobility, responding to the growing demand for environmentally friendly transportation solutions. The testing process will evaluate the aircraft's performance, safety, and efficiency, with the goal of achieving regulatory approval and commercial deployment in the near future.
Hello Robot Unveils Stretch 4: A Simply Useful Robot that Puts People First
Hello Robot has launched Stretch 4, a new open-source robotics platform aimed at enhancing the integration of robots into everyday life. Announced on May 12, 2026, in Martinez, California, Stretch 4 is priced at $29,950 and is designed for researchers and developers working on Physical AI applications. The robot focuses on safe, intuitive human-robot interaction, making it suitable for assisting individuals with mobility impairments. Co-founder and CEO Aaron Edsinger emphasized that Stretch 4 is built to operate alongside people, featuring a compact and lightweight design that prioritizes user safety. The robot is equipped with advanced sensors, including 3D LiDAR and high-resolution cameras, enabling it to navigate complex environments and perform tasks like fetching drinks or closing blinds through a mobile app. The development of Stretch 4 reflects Hello Robot's commitment to creating robots that enhance the quality of life for various users, including children and older adults. By addressing the challenges of human-robot collaboration, the company aims to pave the way for robots to become a familiar presence in homes and workplaces. Charlie Kemp, CTO and co-founder, highlighted that the redesign of Stretch 4 was informed by customer feedback, resulting in a versatile platform that supports a wide range of applications.
UK Government Backs Drone Expansion with £50 Million Investment
The UK government has unveiled a funding initiative amounting to nearly £50 million aimed at enhancing drone operations and advancing air mobility. This investment underscores the government's commitment to integrating autonomous aviation into everyday use across the nation. The announcement reflects a broader strategy to scale routine drone operations, with companies like Windracers being recognized for their contributions to this evolving sector. The funding is part of a concerted effort to foster innovation and establish the UK as a leader in the field of advanced air mobility.
Advanced Air Mobility Drone News Drone News Feeds News Autonomous Aviation BVLOS operations
Coco Robotics and BlindSquare Partner to Make City Sidewalks Safer and More Accessible for All
Coco's delivery robots are now providing live data to enhance BlindSquare alerts, a navigation tool designed for individuals who are blind, visually impaired, or have mobility limitations. This integration aims to improve safety by helping users identify and avoid hazards on sidewalks. The collaboration between Coco and BlindSquare represents a significant advancement in assistive technology, enabling a more accessible urban environment. By utilizing real-time data from the delivery robots, the system enhances situational awareness for users, allowing them to navigate more confidently and independently. This initiative reflects a growing commitment to inclusivity and the use of innovative technology to address the challenges faced by those with disabilities.
Amap debuts quadruped robot Tutu at Beijing humanoid half-marathon
Amap, the mapping platform under Alibaba, introduced its innovative quadruped robot named Tutu during the 2026 Beijing E-Town Humanoid Robot Half-Marathon. This event showcased Tutu's capabilities in assisting visually impaired individuals by navigating complex environments autonomously, without the need for preset routes or remote control. Demonstrations at the marathon highlighted the robot's ability to maneuver through crowds and avoid obstacles effectively. Amap aims to enhance mobility and independence for visually impaired users with this advanced technology, marking a significant step forward in assistive robotics.
News Feed
Electrofluidic fiber muscles could enable silent robotic systems
Researchers at the MIT Media Lab and Politecnico di Bari in Italy have made significant advancements in the field of robotics and prosthetics by developing new artificial muscle fibers that closely mimic the unique capabilities of natural muscles. This breakthrough addresses long-standing challenges faced by engineers in replicating the strength, rapid response, scalability, and control found in biological systems. The innovation promises to enhance the performance of robotic devices and prosthetic limbs, potentially improving their functionality and user experience. This development marks a notable step forward in creating more effective and responsive artificial muscles, which could revolutionize the way machines interact with their environments and assist individuals with mobility impairments.
Robotics
30 Years Ago, Robots Learned to Walk Without Falling
Honda's Prototype 2 (P2), a groundbreaking autonomous humanoid robot, will be honored as an IEEE Milestone during a dedication ceremony on April 28 at the Honda Collection Hall in Japan. Developed in 1996, P2 was the first robot capable of walking without falling, marking a significant advancement in robotics. The IEEE Nagoya Section highlighted that P2 demonstrated the feasibility of humanlike locomotion, setting new standards in the field. The journey to create P2 began in 1986 when Honda researchers aimed to develop a "domestic robot" that could assist with household tasks. Through extensive analysis of human movement and numerous prototypes, the team successfully engineered P2 to walk, climb stairs, and perform various tasks autonomously. This innovation shifted the focus of robotics from industrial applications to designs centered on human interaction. P2's influence extends beyond its initial release, inspiring advancements in humanoid robots and contributing to research in biomechanics and artificial intelligence. The recognition as an IEEE Milestone underscores P2's role in propelling the field of humanoid robotics forward, demonstrating the potential for robots to assist humans in meaningful ways. The plaque commemorating this achievement will be installed at the Honda Collection Hall, celebrating the technical benchmarks set by P2 in mobility, autonomy, and human-robot interaction.
Ieee-history Ieee-milestone Honda Robotics Asimo Type-tiRobotics needs a service framework.
RSF defines a common language for robot service capability, lifecycle operations, certification pathways, and service-provider networks.
