A single destination for timely, editor-curated robotics news from around the world.
Defense manufacturers are under pressure to share technical information swiftly and securely, as delays in receiving approved drawings can hinder production. The Pentagon's pause on CMMC Phase II requirements has shifted the certification landscape, yet contractors must still adhere to Phase I self-...
The U.S. Department of War’s Office of Strategic Capital has announced a conditional loan commitment of up to $450 million to Neros, a California-based small military drone manufacturer. This funding aims to enhance U.S. production of drones and critical components, thereby reducing reliance on fore...
Amazon's Ring has introduced a new flying security camera priced at $250, marking its latest venture into the robotics sector. This launch follows previous delays and aims to enhance home security solutions with innovative technology. The introduction of the flying camera is significant as it repre...
Amazon's Ring has launched two new security devices: the $250 Ring Drone Cam and the $1,000 Ring Rover Cam. The Ring Drone Cam is an indoor flying security camera that autonomously investigates suspicious activity and captures footage day and night. The Ring Rover Cam, repurposed from Amazon's Astro...
Ring, the Amazon-owned security company, has launched its robotics division, unveiling two new devices aimed at enhancing security for homes and businesses. The Ring Drone Cam is designed to patrol homes autonomously, integrating with existing Ring devices to respond to alarms and provide real-time...
Wing, a drone company, has announced its investment of $125 million to enhance its manufacturing capabilities in the United States. A portion of this funding has already been utilized to construct a new 15,000 square-foot manufacturing facility, which aims to bolster production efficiency and meet g...
Path Robotics has announced a successful $300 million Series E financing round, achieving a post-money valuation of $2.45 billion. This funding, led by Georgian, an AI-focused growth equity firm, will support the company's expansion into new applications and industries. The significance of this fin...
Path Robotics has successfully raised $300 million in Series E financing, achieving a post-money valuation of $2.45 billion. This funding round was led by Georgian, with participation from existing investors such as Addition, Drive Capital, and Tiger Global, among others. The investment comes as Pat...
ROKAE Robotics has officially launched the Northeast Intelligent Manufacturing Alliance in Shenyang, partnering with Shenyang Huawei Laser Equipment, Shenyang ASIMOV Intelligent Equipment, and Lingkong Industrial Equipment. This initiative aims to foster collaboration in the robotics industry across...
The 2026 MEFI Medical Engineering Integration Future Industry Conference is set to take place on November 12 in Chaoyang, Beijing. This event aims to bring together industry leaders and experts to discuss advancements in medical engineering and integration technologies. The conference is significan...
As the 119th Congress approaches its conclusion, several significant bills impacting manufacturers are anticipated to pass, including the National Defense Authorization Act (NDAA) and the Bipartisan American Affordability and Jobs Act of 2026. The NDAA seeks to address a weapons shortage amid ongoin...
The 2026 MEFI Medical Engineering Integration Future Industry Conference is approaching, showcasing advancements in medical engineering. This event is significant as it highlights the integration of technology in healthcare, which is crucial for improving patient outcomes and operational efficienci...
Digital twins are data-connected virtual representations of physical objects, systems, or processes that mirror their real-world conditions and behaviors. Utilizing sensors, communication networks, engineering models, and AI, these digital counterparts enhance performance monitoring, scenario simula...
Recent advancements in robotic integration have transformed high-precision manufacturing, making it accessible to midmarket and smaller manufacturers. This shift allows these companies to enhance accuracy and efficiency, leveling the competitive playing field against larger corporations. Robotic sys...
A female billionaire in China is reportedly acquiring significant stakes in the robotics sector, with her net worth estimated at $127 billion. This acquisition strategy highlights her influence in a rapidly evolving industry that is increasingly integrating robotics into various sectors. The import...
Wing, a drone delivery company owned by Alphabet, has announced an investment of up to $125 million in U.S. drone manufacturing over the next two years. This funding will establish a new 15,000-square-foot manufacturing facility in Fort Worth, Texas, aimed at supporting the expansion of Wing's deliv...
Zipline has announced a significant funding round of $1.5 billion, coinciding with a multi-year agreement to expand its partnership with Walmart. This deal will introduce 300 new Zipline drone delivery sites, enhancing Walmart's existing drone delivery operations, which have achieved over 2 million...
A recent study highlights the challenges faced by robotic assistants in accurately identifying objects in emergency situations. For instance, if a robot mislabels a defibrillator as a fire extinguisher, it may fail to retrieve the correct item when needed. This misidentification underscores the impo...
ROBOTWORLD 2026 is set to take place from November 4 to 7 at the Korea International Exhibition Center (KINTEX), featuring 402 exhibitors from 17 countries. The event will showcase advancements in Physical AI and AI-driven manufacturing systems tailored for industrial applications. This exhibition...
The 11th World Intelligent Manufacturing Expo is scheduled to take place in Jinling, showcasing advancements in intelligent manufacturing technologies. This event is significant as it brings together industry leaders and innovators, highlighting the importance of collaboration in shaping the future...
A robust Manufacturing Operations Management (MOM) platform should seamlessly synchronize scheduling and shop-floor execution data, allowing for quick replanning during downtimes or production changes. Manufacturers are advised to seek features such as shared data models, integrated ERP/PLM connecti...
The 2026 MEFI Medical-Engineering Integration Future Industry Conference is set to feature a comprehensive agenda that highlights key topics in medical engineering. This event is crucial for professionals in the field, as it addresses the latest advancements and challenges in integrating medical and...
Neros has announced plans to expand its drone manufacturing capabilities, aiming to produce 1 million drones annually by 2028, supported by Department of Defense funding. The company is relocating to a new 250,000-square-foot facility in Torrance, California, which will enhance its production capaci...
The U.S. Department of Energy (DOE) has launched a national consortium aimed at bolstering domestic battery manufacturing. Announced on October 28, the Battery Manufacturing Accelerator (BattMan) will address challenges in the U.S. drone industry by establishing a reliable and competitive domestic b...
North Korea showcased Harop-like loitering munitions during an unmanned aeronautical technology exhibition. These kamikaze drones, equipped with electro-optical targeting systems and rocket-assisted launchers, signify a significant enhancement in North Korea's unmanned warfare capabilities. The intr...
The 2026 Medical Engineering Integration Future Industry Conference is set to commence, featuring high-level discussions led by academicians and industry experts. This event aims to bridge the gap between clinical practices and industrial applications in medical engineering. The conference is anti...
Rhoda AI showcased its robots' ability to recover from unexpected disturbances during a demonstration with Mike Schroepfer. The event highlighted the robots unpacking automotive parts and handling inspection equipment, emphasizing their adaptability in real-time scenarios. A significant moment invol...
Re:Build has successfully raised $2.1 billion in funding aimed at fostering innovative manufacturing in the U.S. The investment, spearheaded by General Catalyst and JPMorgan Chase’s Strategic Investment Group, is intended to support the launch of new industrial startups and enhance production capabi...
The UK National Oceanography Centre's Autosub Long Range vehicle, known as Boaty McBoatface, has successfully conducted trials off Plymouth's coast to test new ocean monitoring technologies. These trials aimed to explore the interactions between floating offshore wind developments and marine environ...
ByteDance is increasing its hiring efforts in the robotics sector to bolster its initiatives in embodied AI, which integrates software models with physical machines. This strategic move highlights the company's commitment to advancing technology that connects digital and physical realms. As ByteDa...
Abeja and Yamazaki Mazak have initiated a joint development project aimed at advancing physical AI technologies for factory planning, machining, and robotic operations. Utilizing the Abeja Platform, the collaboration will focus on creating AI agents that assist in machining-process design and produc...
The expansion of U.S. drone manufacturing is driving aircraft developers to rapidly introduce new systems with advanced capabilities such as thermal imaging and onboard AI. Manufacturers face the challenge of integrating complex technologies into reliable, flight-ready drones, which can lead to sign...
Indurex, a Netherlands-based company specializing in AI for cyber-physical systems security, has successfully raised €7 million in funding. This investment, backed by Contrarian Ventures, Curiosity, and Axeleo Capital, follows Indurex's recognition as a Cool Vendor by Gartner. The company aims to en...
The humanoid robot industry is experiencing significant growth, with advancements in machine form, motion control, and intelligent interaction. However, as robots move toward practical applications in industrial manufacturing, factors such as operational stability, component lifespan, motion precisi...
A recent study published in Science Robotics discusses the innovative use of spectral swarm robotics to understand the shape of an arena. This approach leverages multiple robotic agents that work collaboratively to gather data about their environment, enhancing spatial awareness and mapping capabili...
NVIDIA has announced the general availability of cuDSS, a CUDA-X library designed to enhance engineering and scientific simulations by leveraging GPU capabilities. This innovation addresses the increasing complexity of designs, which often leads to longer simulation times and higher computing demand...
Europe's industrial leaders are enhancing productivity and innovation by utilizing NVIDIA's CUDA-X and Omniverse libraries, along with Cosmos and Nemotron models, throughout the engineering and manufacturing lifecycle. The NVIDIA Factory Operations Blueprint (FOX) is now available in early access on...
AGCO and Agility Robotics have entered into a commercial agreement to pilot the Digit humanoid robot at AGCO's manufacturing plant in Hesston, Kansas, starting in 2027. The robot will perform repetitive and physically demanding tasks such as parts sorting and stacking, allowing AGCO to assess the in...
Micro Yi Intelligent Manufacturing has initiated a subscription for its first stock of industrial embodied intelligence. This move is significant as it tests the company's profit margins in a competitive market. The subscription is expected to attract interest from investors looking to capitalize on...
The China Academy of Information and Communications Technology has released a report forecasting that embodied intelligence will undergo its first round of industry clearing within the next two years. This prediction highlights the rapid advancements and potential shifts in the market dynamics of em...
AGCO and Agility Robotics have entered into a commercial agreement to implement a humanoid robot pilot at AGCO's Hesston, Kansas facility. This initiative aims to explore the use of the Digit robot for performing repetitive and hazardous tasks in manufacturing operations. The collaboration is signi...
AGCO and Agility Robotics have signed a commercial agreement to implement the Digit robot in AGCO's Hesston, Kansas facility, beginning in 2027. This pilot program aims to automate repetitive and hazardous tasks, enhancing operational efficiency and ergonomic safety while allowing employees to focus...
ABB Robotics has unveiled two new compact, high-performance robots, the IRB 1700 and IRB 1700ID, which offer up to 20 percent shorter cycle times compared to similar robots. These innovations are designed to meet the growing demands of precision manufacturing across various sectors, including electr...
Skyfall AI has introduced SKY-001, a world model aimed at enhancing the design of complex physical products through advanced spatial reasoning and planning. This innovative model is reported to be 100 times faster and operates at 150 times lower compute costs compared to existing models, with a comm...
The 2026 Medical Engineering Integration Future Industry Conference is set to take place in Beijing this November, inviting industry partners to participate. The conference will focus on advanced topics such as surgical robots and brain-machine interfaces, highlighting the latest innovations in medi...
During the National Day celebrations, over 50 mountain scenic spots launched exoskeleton rentals, marking a significant step in integrating advanced technology into everyday life. This initiative highlights the growing acceptance of exoskeletons, which are becoming more accessible to the public, ah...
OpenAI has announced the release of 19 new robot positions that span various sectors, including brain functions, hardware, and manufacturing. This significant expansion reflects the organization's commitment to advancing robotics technology and its applications in diverse fields. The introduction o...
The 140th Canton Fair commenced on October 15, focusing on 'Advanced Manufacturing' and will continue until October 19. This event features the Consumer Electronics and Information Products zone, which is a key area for showcasing advancements in China's manufacturing and technology sectors. This y...
Manufacturers are facing increasing pressure to enhance product quality and speed up delivery amidst labor shortages and supply chain issues. To address these challenges, technologies such as artificial intelligence, digital twins, and real-time simulation are becoming essential components of modern...
Glenfly has introduced the GF800, its first Arm System on Chip (SoC) that integrates eight Cortex-A78 cores along with an in-house GPU and a dedicated Neural Processing Unit (NPU). The chip has completed debugging and is currently being sampled to customers. This development is significant as it po...
RSF defines a common language for robot service capability, lifecycle operations, certification pathways, and service-provider networks.
Daily robotics news, in-depth analysis, conference highlights, and discussions with professionals worldwide.
